eSun PLA Light Weight - 1.75mm - 1kg - Black

Low density & High Foaming Volume Ratio: ePLA-LW has applied active foaming technology to achieve lightweight, low-density PLA parts. The highest foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. The density is only 0.54g/cm3.

Clog-free & No Warping & Less-tangle: Full mechanical winding and strict manual examination ensure tangling-free and avoid filament breaking and snapping.eSUN ePLA-LW filament is orderly wrapped, melts well, and feeds smoothly and constantly without clogging the nozzle or extruder. It does not overlap or tangle, no cracking. It has an excellent printing success rate for large printing models and doesn't need a constant temperature chamber.

Easy to Paint & Wide Application: eSUN ePLA-LW lightweight PLA filament is very easy to paint and has a strong adhesion to surface paint. So it is a good choice for model airplanes, drones, and COSPLAY props.

Good Interlayer Adhesion & Matte Printing Effect: Compared to wood PLA filament,ePLA-LW filament has more stable interlayer adhesion, and the foaming rate and strength can be controlled by adjusting the printing temperature between 210℃-270℃. Printing models are explosion-resistant and easy to repair with a delicate matte surface effect.

Foaming When Printing: At around 210°C-270°C, this filament starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts. For the same model and printing speed, ePLA-LW enables the model aircraft to have a lighter wing load and a lower stall speed. For models such as airplanes, under the condition of balanced strength, reducing the weight can greatly improve the performance of the airplane.