Creality Hyper ABS Filament Gray

Short description

Tough, low-warp Creality Hyper ABS filament (1.75 mm, 1 kg) engineered for stronger, heat-resistant functional parts and smooth finishes — reliable extrusion, consistent diameter, and excellent layer bonding in any colour.

Full product description

Creality Hyper ABS Filament (SKU 3301020041) is a premium-grade ABS designed for demanding FDM prints that need toughness, thermal resistance, and dimensional stability. Formulated to reduce warping and improve interlayer adhesion, Hyper ABS prints clean, strong parts with a smooth, slightly satin surface finish. Each 1 kg spool offers consistent 1.75 mm diameter tolerance for steady flow and predictable results across Bowden and direct-drive extruders. Use Hyper ABS for functional prototypes, mechanical components, enclosure parts, tooling aids, and outdoor-ready models where higher heat resistance and impact strength are required. Available in a full spectrum of colours with the same print behaviour and reliability.

Key features

• Material: Creality Hyper ABS (enhanced ABS formulation)
• Diameter: 1.75 mm with tight tolerance for consistent extrusion
• Spool weight: 1 kg standard spool
• Performance: High impact resistance; improved heat resistance vs PLA; low warp and strong layer bonding
• Finish: Smooth satin surface with good post-processing (sanding, acetone smoothing)
• Compatibility: Works with most FDM/FFF printers; suited to both Bowden and direct-drive setups
• Use cases: Functional parts, enclosures, jigs, mechanical components, automotive and outdoor parts

Technical specifications

• SKU: 3301020041
• Diameter: 1.75 mm
• Net weight: 1 kg (spool)
• Tolerance: ±0.02 mm (typical manufacturing tolerance)
• Recommended nozzle temp: 230–260 °C (tune per printer and colour)
• Recommended bed temp: 90–110 °C; use PEI, glass with a suitable adhesive, or BuildTak
• Nozzle size: 0.4 mm recommended; adapt for detail or speed
• Spool dimensions: Standard Creality spool fit (check printer spool holder compatibility)
• Moisture handling: Store sealed and dry; dry at 60–70 °C if needed before printing

Printing recommendations

• First layer: Slow speed (20–30 mm/s), nozzle 230–250 °C, bed 95–105 °C, use brim or raft for best adhesion.
• Print speed: 40–80 mm/s for optimal strength; faster speeds possible after calibration.
• Cooling: Minimal part cooling (0–20%) to improve layer bonding and reduce cracking.
• Enclosure: Recommended for best dimensional stability and reduced warping.
• Post-processing: Sanding, painting, and acetone vapor smoothing produce professional finishes.
• Storage: Keep in vacuum bags with desiccant to preserve filament quality.