eSUN ePETG Basic - Red - 1.75 - 1kg

eSUN PETG Basic Filament – Technical Specifications

• Plastic Type – PETG (Polyethylene Terephthalate Glycol)

• Plastic Diameter – 1.75mm ± 0.03

• Density (g/cm³) – 1.27

• Tensile Strength (MPa) – ~68 (X‑Y), ~36 (Z)

• Elongation at Break (%) – ~7.5 (X‑Y), ~3.2 (Z)

• Flexural Strength (MPa) – ~100 (X‑Y), ~60 (Z)

• Flexural Modulus (MPa) – ~2637 (X‑Y), ~2208 (Z)

• Impact Strength (kJ/m²) – ~2.3 (X‑Y), ~2.1 (Z)

• Heat Distortion Temperature (°C) – ~74 (0.45MPa)

• Filament Weight – 1kg spool

Suggested Print Settings

• Nozzle Temperature (°C) – 240 to 260

• Bed Temperature (°C) – 75 to 90

• Nozzle Size – 0.2–0.8mm

• Print Speed (mm/s) – ≤250 (slightly slower for best finish)

• Cooling Fan – 50–100%

• Drying Recommendations – 60°C for >8 hours before use

• Build Surface – PEI recommended for adhesion

Key Features

• Stronger than PLA, easier to print than ABS

• Glossy, clear surface finish

• Low shrinkage and minimal warping

• UV and moisture resistant – suitable for outdoor use

• Stable dimensions for reliable prints

• Good impact resistance and mechanical strength

Applications

• Functional parts and housings

• Decorative items and lamps

• Containers and stationery

• Toys and hobby projects

• Outdoor applications requiring UV/moisture resistance

Packaging

• Supplied on 1kg spool

• Vacuum‑sealed with desiccant for moisture protection

• Compatible with most FDM printers

This filament is a versatile everyday PETG: tougher than PLA, easier than ABS, and ideal for both functional and decorative prints.